Moheb Baspar Petrochemical PMGIG.Co

GPPS Grade Number 1109

   GPPS Grade Number 1109
VALUE
TEST Conditions
UNITParameter
1/02ASTM D-1895gr/cm3Density/Bulk Density
2900ASTM 790MPAFlexural Modulus
15ASTM D-638MPATensile Strength
98ASTM D-1525°CVicat Softening
97ASTM D-648°CHeat Distortion-Temperature(HDT)
8ASTM D-1238g/10 minMfi
500>CLGLABPSG004ppmDerermlnation of Residual-Styrene Monomer
PDF file Technical specifications of GPPS 1109 
Moheb Baspar Petrochemical PMGIG.Co

HIPS Grade Number 4512

   HIPS Grade Number 4512
TYPICAL VALUETEST METHOD UNIT PROPERTY
4ASTM D-1238 g/10min MELT FLOW INDEX (200°C-5KG)
500>ASTM D-1238 PPMSTYRENE RESIDUAL MONOMER
94ASTM D-1525°CVICAT SOFTSNING POINT(50°C/hr 1kg)
17ASTM D-638 MPATENSILE STRESS AT YEILD
19ASTM D-638 MPATENSILE STRESS AT BREAK
64ASTM D-638 %ELONGATION AT BREAK
12/5ASTM D-256 KJ/M2IZOD IMPACT
1600ASTM D-638 MPA TENSILE MODULUS
PDF file Technical specifications of HIPS 4512  
Moheb Baspar Petrochemical PMGIG.Co

HIPS Grade Number BY ORDER

   HIPS Grade Number BY ORDER
TYPICAL VALUETEST METHOD UNIT PROPERTY
4---10ASTM D-1238 g/10min MELT FLOW INDEX (200°C-5KG)
500>ASTM D-1238 PPM STYRENE RESIDUAL MONOMER
89---94ASTM D-1525 °C VICAT SOFTSNING POINT(50°C/hr 1kg)
ASTM D-638MPATENSILE STRESS AT YEILD
ASTM D-638MPATENSILE STRESS AT BREAK
50---70ASTM D-638%ELONGATION AT BREAK
6---13ASTM D-256 KJ/M2 IZOD IMPACT
ASTM D-638MPATENSILE MODULUS
PDF file Technical specifications of HIPS Grade Number BY ORDER