Polystyrene is one of the building materials that make the building integrated. It has been used in construction since polystyrene was recognized in the 1950s. Today, these building materials are used for energy efficiency and indoor quality.
Polystyrene application has increased a lot in recent years. Polystyrene is used in construction and the use of this added material is increasing day by day. It is a hard material that is impact resistant and because it is light it can be transported to the upper floors of the building and then installed. This material prevents energy loss and water evaporation.
This material is durable and its maintenance cost is cheap. Polystyrene is a plastic that is composed of spherical particles and 98% of air, and this new plastic material is a good insulator and is resistant to physical shocks.
Polystyrene is a plastic material obtained by polymerization. The quality of this material depends on the distribution of grains.
Polystyrene application in building architecture
Expansion stages of expanded polystyrene
- Pre-expansion
- Medium evolution and consolidation
- Final expansion and molding
Polystyrene application in building architectures
It is produced by combining lightweight concrete and lightweight aggregates such as air-absorbing agents, clay, pumice, vermiculite, and resistant concrete. More than one aggregate is often used in concrete. By combining polystyrene in cement compounds, lightweight concrete and thermal insulation can be produced.
Waste materials such as paper ash can be used with polystyrene, which is used in dyeing, masonry, and plastering. By adjusting the amount of water in the cement and the composition of polystyrene, the strength of this building material can be adjusted.
Since polystyrene is impermeable, it is used for the floor of the building and any part where there is a possibility of water leakage. In 1973, Kirk was introduced; Building materials can solve the problem of construction aggregates such as fly ash, pumice, oily palm bark, and rubber waste, all of which are porous.
Polystyrene application can also include: use in veneer panels, composite flooring, and concrete blocks. Polystyrene is used as insulation and a protective layer and absorbs energy.
Polystyrene is used as a lightweight aggregate. Styrene is mixed with cement epoxies and used in concrete and cement. Wind ash and silica vapor act as adhesives. Unlike other building materials, polystyrene has better resistance to corrosion and chemicals.
Polystyrene application in military structures
With this chemical in combination with other construction materials and cement, military equipment can be buried underground and the possibility of their detection is minimized. It should be noted that the styrene material, despite being light and insulating, has low strength. Because these building materials are obtained with molten materials. By adding materials, the strength and durability of this building material can be increased.
In addition, it can be dried quickly with steel fibers. The porosity of this material causes the permeability of this material; However, reinforcement contributes to the strength of the material.
Styrene is the best alternative to wall hangings; This way you can save a lot of construction costs.
Polystyrene can be recycled and reused. These wastes can be dissolved with resin and all kinds of commercial and industrial building materials can be designed and prepared. It can also be used as a radioactive waste repellent.
Use of polystyrene in military structures
Buy High Impact Polystyrene (HIPS)
Moheb Baspar Company is a manufacturer of High Impact Polystyrene (HIPS). This material is used to produce many plastic materials and you can buy this material at a reasonable price from this company in bulk and individually.
Sale of phthalic anhydride (PA)
Phthalic anhydride (PA) is the raw material of PVC, which is the raw material of many plastics. This material has many uses; It is also used in paints and insect repellent chemicals. The commercial department of Moheb Baspar Company offers this material at a reasonable price.
Sales of Dioctyl Phthalate (DOP)
Dioctyl phthalate (DOP) is a PVC raw material used in the manufacture of many rubber materials. The company that produces various plastic materials can buy this raw material at a reasonable price from Moheb Baspar Company.
Buy General Purpose Polystyrene (GPPS)
The applications of General Purpose (GPPS) polystyrene are well known. Today, this material is used in the petrochemical industry and is a raw material that can be used as a building material. You can buy it at a reasonable price from Moheb Baspar Company.
Conclusion
Polystyrene application is very widespread in the construction industry. It can be combined with other common aggregates to build a stronger structure. This material can be used as a preventative against water leakage in the floor and other parts of the building where such a possibility is predicted.